{"product_id":"b07vwctctp","title":"RO Filter Set for KR15 KR10 KFC1 KFC2 (4 Piece Set with Inline)","description":"\n                        \u003cdiv\u003e\n                            \n                            \u003cp\u003e\u003cstrong\u003e⭐ Key Features\u003c\/strong\u003e\u003c\/p\u003e\n                            \u003cp\u003e•FOUR STAGES IN ORDER - The polypropylene sediment filter goes first and holds back the sand, silt and rust that would blind everything behind it. The carbon block follows, then the granular carbon, and that pair does the work that costs you money if you skip it: chlorine reaching the membrane is the single thing that shortens membrane life fastest. The inline post filter polishes the stored taste on the way to the faucet.\u003c\/p\u003e\n\u003cp\u003e•BETTER TASTING WATER FROM EVERY SOURCE - Whether your home runs on municipal tap water or a private well, the carbon reduces the chlorine taste and odor that make water unpleasant to drink and cook with. For certified reduction of specific contaminants, look for cartridges tested to NSF\/ANSI 53 for those claims.\u003c\/p\u003e\n\u003cp\u003e•FITS THESE SYSTEMS - Replacement set for the KR15 and KR10 four stage positions, covering KFC1 and KFC2. All the drop in cartridges are standard 10 by 2.5 inch, so the same set fits any reverse osmosis system built around standard 10 inch filter bowls, including RCC7, ROES-50, RO5DX and WP5-50.\u003c\/p\u003e\n\u003cp\u003e•MEMBRANE NOT INCLUDED - The membrane is a separate part and is not in this kit; use the selector above for the complete set if yours is due. Check the fitting on your post filter before ordering too, since inline cartridges come in threaded and push to connect versions and the two are not interchangeable.\u003c\/p\u003e\n\u003cp\u003e•MATCH THE FILTER TO YOUR WATER - Cartridges are maintenance parts, not water treatment plans, and no single one handles everything. Carbon reduces chlorine taste and odor. Sediment media captures sand, silt, dirt and rust. For any specific contaminant you are concerned about, look for a system certified to the NSF\/ANSI standard that names it. If you are on a private well, start with a water test.\u003c\/p\u003e\n                            \u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n                        \n                            \u003cp\u003e\u003cstrong\u003e🛠️ Specifications\u003c\/strong\u003e\u003c\/p\u003e\n                            \u003cp\u003e• \u003cb\u003eBrand\u003c\/b\u003e : CFS\u003cbr\u003e• \u003cb\u003eStyle\u003c\/b\u003e : 4 Piece Set with Inline\u003cbr\u003e• \u003cb\u003eMaterial\u003c\/b\u003e : Carbon,Activated Carbon,Polypropylene\u003cbr\u003e• \u003cb\u003eUnit\u003c\/b\u003e : 1 Count\u003cbr\u003e• \u003cb\u003eColor\u003c\/b\u003e : White\u003cbr\u003e• \u003cb\u003eItem highlights\u003c\/b\u003e : Sediment, carbon block, GAC and inline post filter. Standard 10 x 2.5 in, membrane separate.\u003cbr\u003e• \u003cb\u003eType\u003c\/b\u003e : POTABLE_WATER_FILTER\u003cbr\u003e\u003c\/p\u003e\n                            \u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n                        \n                            \u003cp\u003e\u003cstrong\u003e📋 Product Description\u003c\/strong\u003e\u003c\/p\u003e\n                            \u003cp\u003eCFS four piece replacement filter set for KR15 and KR10 reverse osmosis systems: a polypropylene sediment filter, a carbon block, granular activated carbon and an inline post filter. Four stages in order, and it helps to know what each one is for. The sediment filter goes first and holds back the sand, silt and rust that would blind everything behind it, which is the cheapest work in the system and the reason the rest lasts. The carbon block follows, then the granular carbon, and that pair does the job that costs you money if you skip it: chlorine reaching the membrane is the single thing that shortens membrane life fastest. The inline post filter goes last, polishing the taste the water picks up sitting in the storage tank before it reaches the faucet. The membrane is a separate part and is not included in this kit. That is deliberate rather than an omission: prefilters change about every six months while a membrane normally runs one to two years, so buying a membrane at every service means paying for life you then throw away. Use the selector above for the complete set if yours is genuinely due. One thing to check before ordering: inline post filters come in threaded and push to connect versions, and the two are not interchangeable, so look at the fitting on the one you are removing. The drop in cartridges are standard 10 by 2.5 inch, so this set covers the KR15 and KR10 four stage positions including KFC1 and KFC2, and fits any reverse osmosis system built around standard 10 inch filter bowls, including RCC7, ROES-50, RO5DX and WP5-50. Change the set about every six months on typical municipal water, sooner on well water. Run water through the new carbon cartridges for a few minutes before use to clear loose carbon fines. This is a compatible replacement set made by CFS, not an original manufacturer part, and part numbers are used for reference only.\u003c\/p\u003e\n                        \n                        \u003c\/div\u003e\n                    ","brand":"CFS","offers":[{"title":"Default Title","offer_id":67696685547740,"sku":"B07VWCTCTP","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0780\/3584\/5340\/files\/img_611c91f9-d395-46f8-b9cd-f17776bc64b1.jpg?v=1791938961","url":"https:\/\/myaquavibe.com\/products\/b07vwctctp","provider":"AquaVibe","version":"1.0","type":"link"}